Raritan Computer DKX2-v2.6.0-0R-E User Manual

 

Chapter 12: Command Line Interface (CLI) 

 

The name command is used to configure the network name. The syntax 
of the name is: 

name [devicename <devicename>] [hostname <hostname>] 

Device name configuration 

devicename <devicename>   Device Name 

hostname   <hostname>     Preferred host name (DHCP 
only) 

Name Command Example 

The following command sets the network name: 

Admin > Config > Network > name devicename My-KSX2 

 

 

Use the IPv6_command to set IPv6 network parameters and retrieve 
existing IPv6 parameters. 

Ipv6_interface mode enable ipauto none ip 
2001:db8:290c:1291::17 prefixlen 128 gw 
2001:db8:290c:1291::1