Raritan Computer MCC8R User Manual
16
M
ASTER
C
ONSOLE
II
U
SER
M
ANUAL
Figure 25 Edit Names and Scan Rate Menu (Second-Tier MCC8)
3. Use the <Tab>, <Shift-Tab> or < >/< > keys to move the cursor to the line you want to edit. Use
<>/< > to move within a line.
Note: Because you have specified a two-tier configuration, use the <Page Up>/<Page
Down> keys to view the next or previous group of up to eight channels.
Down> keys to view the next or previous group of up to eight channels.
a. To change the Name of a second tier MasterConsole Device in the base unit channel list: Type up
to seven alphanumeric characters (no spaces). The "/" (backslash) first character cannot be
changed.
changed.
b. To change the Name of any computer connected to either the base unit or second-tier
MasterConsole, type up to eight alphanumeric characters (no spaces).
c. To change the Channel-Specific scan Rate for any highlighted channel (default is 3 seconds):
Type a number from 00 to 99 (in seconds). When the AutoScan Mode in the Configuration Menu
is set to Individual, these Channel-Specific Scan Rates are enabled. If the AutoScan mode is set to
Global, the global scan rate will be used.
is set to Individual, these Channel-Specific Scan Rates are enabled. If the AutoScan mode is set to
Global, the global scan rate will be used.
4. When you move to a different page or exit this Menu, you are prompted to save your changes. Press
<Y> to save.
5. To exit the Edit Names and Scan Rate Menu: Press any Menu F key to go to another menu, or press
<Esc> to go to the Selection Menu.