Q-Logic 8C/16 User Manual
4 – Managing Switches
Managing Firmware
59022-06 A
4-29
Q
4.12.2
Activating the Pending Firmware
To activate firmware that is both inactive and pending, open the Switch menu in
the faceplate display and select Activate Firmware. SANbox Manager attempts a
non-disruptive activation if the active and pending firmware versions are 2.0 or
greater. Otherwise, SANbox Manager prompts you reset the switch to activate the
pending firmware.
the faceplate display and select Activate Firmware. SANbox Manager attempts a
non-disruptive activation if the active and pending firmware versions are 2.0 or
greater. Otherwise, SANbox Manager prompts you reset the switch to activate the
pending firmware.
4.12.3
Changing the Pending Firmware
To change the pending firmware to the alternate image, do the following:
1.
In the faceplate display, open the Switch menu and select Firmware
Fallback.
Fallback.
2.
The Firmware Fallback dialog prompts you to confirm the firmware version
that is to become the pending firmware. Choose the Yes button to select the
fallback firmware or No to cancel.
that is to become the pending firmware. Choose the Yes button to select the
fallback firmware or No to cancel.
3.
SANbox Manager attempts a non-disruptive activation if the active and
pending firmware versions are 2.0 or greater. Otherwise, SANbox Manager
prompts you reset the switch to activate the pending firmware.
pending firmware versions are 2.0 or greater. Otherwise, SANbox Manager
prompts you reset the switch to activate the pending firmware.