Nortel Networks 1000BASE-LX User Manual
Chapter 3 Using the console interface
117
Using the BayStack 420 10/100/1000 Switch
As an alternative method instead, you can highlight the field and then enter +2/9
[Return]. The existing field keeps the previous list and adds the new port number
(2/9) between ports 2/7 and 3/14.
[Return]. The existing field keeps the previous list and adds the new port number
(2/9) between ports 2/7 and 3/14.
(If you choose to add port 2/8 to the existing port number list, the field accepts the
new port 2/8 but shows the new port number list field as: 1/3,2/7-8,3/1-4.)
new port 2/8 but shows the new port number list field as: 1/3,2/7-8,3/1-4.)
Removing a port from an existing port number list
To remove a port from the port number list, use the minus sign (-) character
instead of the plus sign (+) character as described above.
instead of the plus sign (+) character as described above.
Copying an existing field into and adjacent field
You can use the period (.) character to copy a previously entered field value into
the field directly next to it. For example, to copy the Allowed Source S3 (shown in
the field directly next to it. For example, to copy the Allowed Source S3 (shown in
) into the next field (entry 6):
1
Enter a MAC address into the next MAC address field.
2
Highlight the (blank) Allowed Source field.
3
Enter the period (.) character and click Return.
The port number list from the previous entry is copied into the new field.