Netgear ReadyNAS 102 User Manual
Shared Folders
66
ReadyNAS OS 6.1
•
If you are using the AFP file-sharing protocol, enter the following command in the
Server Address field:
Server Address field:
afp://<hostname>
•
If you are using the SMB file-sharing protocol, enter the following command in the
Server Address field:
Server Address field:
smb://<hostname>
In both cases, <hostname> is the name that you assigned to your ReadyNAS system
or the default host name if you did not change it.
or the default host name if you did not change it.
Note:
If you cannot access the ReadyNAS using its host name, try entering
afp://<ReadyNAS IP address> or smb://<ReadyNAS IP address> instead.
<ReadyNAS IP address> is the IP address of the ReadyNAS.
<ReadyNAS IP address> is the IP address of the ReadyNAS.
4.
Click the Connect button.
You are prompted to log in to your ReadyNAS system.
5.
Enter a user ID and password.
You can log in with administrator or user credentials. If you log in as a user, your access
is limited by the settings configured by the ReadyNAS system administrator.
is limited by the settings configured by the ReadyNAS system administrator.
You are prompted to select a volume. Mac OS X calls your ReadyNAS shared folders
volumes.
volumes.
6.
Select the volume or volumes (shared folder or folders) you want to access and click the OK
button.
button.
Finder displays the volume contents.
Use a Linux or Unix Device
You can access shared folders on your ReadyNAS system using a network-attached Linux or
Unix device.
Unix device.