Netgear WFS709TP-100NAS User Guide

2-4

Deploying a Basic WFS709TP System

In this deployment scenario (

), the APs and the WFS709TP are on different 

subnetworks and the APs are on multiple subnetworks, with routers between the APs and the 
WFS709TP. The WFS709TP is connected to a Layer 2 switch or router through a trunk port that 
carries traffic for all wireless user VLANs. An upstream router functions as the default gateway for 
the wireless users.

Note: This deployment scenario does not use VLAN 1 to connect to the Layer 2 switch or 

router through the trunk port. When the initial setup prompts you for the IP address 
and default gateway for VLAN 1, use the default values. In later steps, you will 
configure the appropriate VLAN to connect to the switch or router as well as the 
default gateway.