Netgear WFS709TP-100NAS User Guide
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
2-20
Deploying a Basic WFS709TP System
v1.0, June 2007
Additional Configuration
After you have installed a basic WFS709TP system, the APs advertise the default netgear-ap
SSID. Wireless users can connect to this SSID, but because you have not yet configured
authentication, policies, or user roles, they will not have access to the network. Other chapters in
this manual describe how to build upon this basic deployment to configure user roles,
authentication, authentication servers, and other wireless features.
SSID. Wireless users can connect to this SSID, but because you have not yet configured
authentication, policies, or user roles, they will not have access to the network. Other chapters in
this manual describe how to build upon this basic deployment to configure user roles,
authentication, authentication servers, and other wireless features.
describes how to configure WLANs using the browser
interface. If you used the AP Installation Wizard in the browser interface to program and install
your APs, you are redirected to the WLAN Basic Configuration page where you can configure the
SSID and authentication for a WLAN.
your APs, you are redirected to the WLAN Basic Configuration page where you can configure the
SSID and authentication for a WLAN.