Lucent Technologies 553B User Manual

The Customer Administerable Timer is used in conjunction with the Call
Forwarding and Remote Line Access features. The timer disconnects

calls made via Call Forwarding and/or Remote Line Access after these
calls reach a system-wide call duration limit. The Customer
Administerable Timer can be set to a value of from 1 to 999 minutes.

To administer the Customer Administerable Timer:

1.

2.

3.

4.

5.

Enter administration mode by sliding the T/P switch to P

and touching Administer.

Dial *68.

Dial the desired three-digit timer value. Three digits must

be dialed. For example, a timer value of 1 minute would
be dated as 001, a value of 10 minutes would be dialed

as 010, and a value of 120 minutes (2 hours) would be

dialed as 120. To reset the timer to its default value of

no time limit, dial 000.

Touch Administer. 

Leave administration by sliding the T/P switch to the center

position.