Fujitsu eLux NG S26361-F2600-L134 User Manual

 

 

 

 

 

 

Build # 27

  

30

 

3.  (optional) Enter a local hostname. It will be transferred to the server upon boot if 

server settings permit (a hostname may not already be defined on the server). 

4. Click 

 and Yes in the eLux NG Starter dialog box regarding restart. 

If a server is not found within the defined time, it uses the settings saved from the previous 
session. 

If you do not have one of the above servers, you can enter the IP address and network 
information directly on the terminal.  

1. From 

the 

 tab, click the Network subtab.  

2. Click 

. 

3.  Enter the IP address, subnet mask, host name and domain. 
4.  To enter a gateway (router) address, click the Add button below Gateway. 
•  Enter the IP address in the dialog box. Click OK. 
•  Repeat until you have entered all gateway addresses. 
•  To delete a gateway entry, select it from the Gateway list and click Delete. Click Yes 

in the eLux NG Starter dialog box. 

•  To change the order, you must delete and re-enter the IP addresses. 
5.  To enter the IP address of a domain name server, click the Add button below DNS. 
•  Enter the IP address in the dialog box. Click OK. 
•  Repeat until you have entered all DNS addresses. 
•  To delete a DNS entry, select it from the DNS list and click Delete. Click Yes in the 

dialog box. 

•  To change the order, you must delete and re-enter the IP addresses. 
6. Click 

 and Yes in the eLux NG Starter dialog box regarding restart. 

 
To avoid network conflicts, verify that the IP address you enter is not in use by another 
machine or assigned a DHCP pool. 
 
Those are the three ways to enter the IP address and network information on a Thin Client. 
The following two sections describe advanced features, such as how to set the client 
hostname on the DHCP server using the terminal or how to set a local hosts list. 

With a DHCP request it is possible to transfer the local host name to the DHCP. The host 
name will then be visible at the DHCP server. 

1. Click 

 

. 

2.  Enter the host name of the Thin Client in the field Hostname and click Apply. The 

remaining fields should stay empty – they are automatically set by the DHCP server. 

3. Click 

 in the eLux NG Starter dialog asking for restart. 

4. Click 

. 

5. Click 

. 

6. Click 

 in the eLux NG-Starter message box asking for restart.