Fujitsu eLux NG S26361-F2600-L134 User Manual
Product codes
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
58
Figure 37: Results of the Test button in the Define drives dialog box
3. Click
Test
. If the drive can be used, the message “Drive can be used” appears. If the
server cannot be located, the message “Server cannot be contacted” appears. Check
your entries for validity.
your entries for validity.
4. Click
OK
in the Define drives dialog box. Click Apply in the Drives subtab and Yes in
the eLux NG Starter dialog box.
Note
It is particularly important to click Apply and Yes in the confirmation request dialog box
to complete the mapping process.
3.9.2 Network File System
eLux NG comes equipped with NFS drive capability. No additional settings modifications are
required.
To use a network drive shared via NFS, use the following format:
required.
To use a network drive shared via NFS, use the following format:
/nfs/
<hostname>
or
/nfs/
<IP address>
When the Thin Client accesses an NFS drive, all shared NFS directories on this host are
displayed.
displayed.
Warning
All Thin Clients have access to the server as “nobody.” There is no privacy. Each
client has the same access rights to the other clients’ files. Therefore, we strongly recommend
that you permit write-protected drives only.
that you permit write-protected drives only.
3.9.3 Internal
Drives
If your hardware includes an internal (IDE) CD-ROM or floppy drive, you can access it without
further configuration. It is also automatically mapped in a Citrix ICA session.
To access it locally, use the mount point. See section “3.9.5 Mount points.”
further configuration. It is also automatically mapped in a Citrix ICA session.
To access it locally, use the mount point. See section “3.9.5 Mount points.”