Fujitsu eLux NG S26361-F2600-L134 User Manual
Product codes
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
61
3.11 Printer
You can print from both local and network printers. In addition, other workstations or servers within the
network can use a printer installed locally on your Thin Client, which supports LPR and TCP direct
print. You can use eLux NG to configure and assign logical names to local printers, which can be used
from within the network. If the printer name for the local or network printer is different from the preset
“lp”, you must also configure it within in the local application, such as Mozilla.
network can use a printer installed locally on your Thin Client, which supports LPR and TCP direct
print. You can use eLux NG to configure and assign logical names to local printers, which can be used
from within the network. If the printer name for the local or network printer is different from the preset
“lp”, you must also configure it within in the local application, such as Mozilla.
Figure 38: Setup > Printer
The printer attached locally to your Thin Client may be used by other machines if they support TCP
direct print (for Windows: Windows 2000 and later). In this case, enter the port number of the local
printer’s interface (parallel or USB) in the “TCP direct print” area.
For local applications that use PostScript
direct print (for Windows: Windows 2000 and later). In this case, enter the port number of the local
printer’s interface (parallel or USB) in the “TCP direct print” area.
For local applications that use PostScript
®
as the output format, such as Mozilla or Acrobat Plug-in,
you must define a PostScript printer.
The Maximum printer response time allows you to set a time-out for a locally defined printer. If the
printer is for any reason unavailable (paper out, cannot be reached, broken, etc.), the local application
stops responding, or “hangs.” The print job will be terminated after this time-out, allowing you to
resume using the local application.
With eLux NG V1.23 and higher you can print a test page in text format or PostScript format (see
figure 38).
The Maximum printer response time allows you to set a time-out for a locally defined printer. If the
printer is for any reason unavailable (paper out, cannot be reached, broken, etc.), the local application
stops responding, or “hangs.” The print job will be terminated after this time-out, allowing you to
resume using the local application.
With eLux NG V1.23 and higher you can print a test page in text format or PostScript format (see
figure 38).