Netgear EDA 500 User Manual
5.
From the Teaming Mode list, select a teaming mode.
For more information about teaming modes, see
For more information about teaming modes, see
on page 158.
6.
(For IEEE 802.3ad LACP and XOR only) Select the radio button next to the hash type option that you
want to use.
For more information about hash types, see
want to use.
For more information about hash types, see
on page 158.
7.
(For Active Backup only) From the Primary Device list, select the Ethernet interface that is active by
default.
Other Ethernet interfaces in the bond become active if and only if the active interface fails.
default.
Other Ethernet interfaces in the bond become active if and only if the active interface fails.
8.
Click the Apply button.
Your changes are saved.
Your changes are saved.
Delete a Bonded Adapter
To delete a bonded adapter and reestablish separate Ethernet links:
1.
Select Network > Bonds.
2.
Select the settings gear icon for the bonded adapter that you want to delete.
3.
From the pop-up menu that displays, select Delete.
4.
Confirm the deletion.
The bonded Ethernet interfaces are separated into individual links.
The bonded Ethernet interfaces are separated into individual links.
5.
Reconfigure the switch or router to which the ReadyNAS is attached for single interfaces.
Configure Global Settings for File-Sharing Protocols
This section covers file-sharing concepts and configuring the different types of file-sharing protocols on
your ReadyNAS storage system.
your ReadyNAS storage system.
System Settings
163
ReadyNAS OS 6.2