Netgear EDA 500 User Manual

HTTPS cannot be disabled. The local admin page requires HTTPS to be enabled.

Enable HTTPS

Cannot be modified. Port 1, the value 443, is reserved for your ReadyNAS system.

Port 1

Set to a value in the range 1024-65535. Check if you need to enable port forwarding of the
port you choose on the router. See the port forwarding instructions provided with your
router.

Port 2

Configures the host name used for your ReadyNAS system to generate its SSL certificate
and then creates a new SSL certificate. NETGEAR recommends that you update this field
to match the current IP address of your ReadyNAS system and then generate a new SSL
certificate to avoid future certificate errors from your web browser. In this scenario, it is best
to have a fixed IP configuration for your ReadyNAS system so that the certificate remains
valid. Also, if the WAN IP address configuration is DHCP, NETGEAR recommends that
you use a Dynamic DNS service to access the ReadyNAS through a persistent fully qualified
domain name provided by a DDNS service provider rather than through an IP address.

SSL Key Host

Click the Apply button.
Your changes are saved.

This section covers configuring the settings for ReadyDLNA and iTunes streaming server on your
ReadyNAS storage system.

The ReadyDLNA service lets you stream media on your ReadyNAS to DLNA players such as the Sony
Playstation 3, XBox 360, TiVo, and DLNA-enabled TVs. You can stream your media to any device that
complies with the Digital Living Network Alliance (DLNA) standard, including mobile clients, such as iPads,
iPhones, and Android devices.

ReadyDLNA supports to following formats:

Music. wav, wma, pcm, ogg, mp3, m4a, flac, aac

Video. 3gp, mp4, wmv, xvid, vob, ts, tivo, mts, mpeg, mpg, mov, mkv, m4v, m4p, m2t, m2ts, flv, flc,
fla, divx, avi, asf

Photo. jpg, jpeg

Playlist. m3u, pls

Select System > Settings > Services.

Click the ReadyDLNA button.