Netgear EDA 500 User Manual
System Monitoring
The local admin page for your ReadyNAS system provides system and disk health information as well as
system logs. Real-time historical monitoring is available for most models. You can also enable the SNMP
protocol to remotely monitor your ReadyNAS system using an SNMP client.
system logs. Real-time historical monitoring is available for most models. You can also enable the SNMP
protocol to remotely monitor your ReadyNAS system using an SNMP client.
System and Disk Health Information
The ReadyNAS provides basic system health information about the fans, temperatures, optional
uninterruptible power supplies, and optional expansion disk arrays.
uninterruptible power supplies, and optional expansion disk arrays.
To view system and disk health information :
1.
Select System > Performance > Status.
2.
(Optional) To view disk status and health information, point to a disk status indicator.
System Real-Time and Historical Monitoring
The ReadyNAS provides status graphics for volume throughput, network throughput, volume utilization,
and system temperatures.
and system temperatures.
Status graphics are not supported for ReadyNAS 102 and 104 systems.
Note:
To display and configure the system status graphics:
1.
Select System > Performance.
2.
Scroll down to Volume, Network, Utilization, or Temperature to view the corresponding status graphics.
The following sections describe the information displayed on these status graphics.
Volume
The Volume throughput graphic shows the number of read and write operations per second.
System Maintenance
179
ReadyNAS OS 6.2