3com 9100 User Manual
Types of VLANs
69
Figure 9 Two port-based VLANs spanning two Switch 9100 devices
VLAN Accounting spans Switch 1 and Switch 2 by way of a connection
between Switch 1, port 1 and Switch 2, port 3. VLAN Engineering spans
Switch 1 and Switch 2 by way of a connection between Switch 1, port 5,
and Switch 2, port 6.
between Switch 1, port 1 and Switch 2, port 3. VLAN Engineering spans
Switch 1 and Switch 2 by way of a connection between Switch 1, port 5,
and Switch 2, port 6.
Using the configuration described above, you can create multiple VLANs
that span multiple switches, in a daisy-chained fashion. Each switch must
have a dedicated port for each VLAN. Each dedicated port must be
connected to a port that is a member of its VLAN on the next switch.
that span multiple switches, in a daisy-chained fashion. Each switch must
have a dedicated port for each VLAN. Each dedicated port must be
connected to a port that is a member of its VLAN on the next switch.
Tagged VLANs
Tagging is a process that inserts a marker (called a tag) into the Ethernet
frame. The tag contains the identification number of a specific VLAN,
called the VLANid.
frame. The tag contains the identification number of a specific VLAN,
called the VLANid.
The use of 802.1Q tagged packets may lead to the appearance of
packets slightly bigger than the current IEEE 802.3/Ethernet maximum of
1,518 bytes. This may affect packet error counters in other devices, and
may also lead to connectivity problems if non-802.1Q bridges or routers
are placed in the path.
packets slightly bigger than the current IEEE 802.3/Ethernet maximum of
1,518 bytes. This may affect packet error counters in other devices, and
may also lead to connectivity problems if non-802.1Q bridges or routers
are placed in the path.
91_005
Accounting
Engineering
Switch 1
Switch 2