3com CM 4000 User Manual

In this mode (already described on page 6−89) the destination is shown in the Preset window. (The CP 3830P will show two
destinations.) If the panel is equipped with a CP 3809 Expansion, the outputs controlled by that panel will be indicated.

To return to Home mode, press CLEAR.

This mode allows the six level buttons to select and status each level.

To return to Home mode press CLEAR. (In Home mode, the six level buttons are used for splits and the UP and DOWN but-
tons are used for source selection)

Note 1: Audio status mode can only be used if an appropriately configured Venus switcher is connected.

This mode is accessed by pressing MENU three times; the MENU button will light in red. The Current window will show
the audio mode for the audio channel shown in the Preset window. In Figure 6−127, the Left audio channel is set to “Normal.”

LEFT

 NORMAL

2

3

4

5

7

8

9

0

6

1

VTR

CG

NET

VCR

CAM

SAT

TEST

NUM

AUX

FILM

PATCH

STU

Menu

Lock

Prot

Clear

Chop

Take

VIDEO

LEFT

RIGHT

AES1

T/C

CURRENT

PRESET

CP 3830

Other possibilities are:

 MIX − Left and right are mixed on this channel.

 REVERSE − Signal is from the opposite channel.

The six level keys can be used to check other levels.

Note 2: You cannot change settings in Audio Status mode; this must be done using Audio Switching mode. See
page 6−98.