3com CM 4000 User Manual

The CP 3832/64 has the capability of controlling Venus Audio Modes, which are Normal, Mix, and Reverse. These changes
are made to individual levels prior to completing a switch by pressing the TAKE button.

Note: Audio switching mode can only be used if an appropriately configured Venus switcher is connected.

To perform a special stereo switch:

1.

Enter Preset mode by pressing PRESET. The button will flash red.

2.

Select a source. The source mnemonic will appear in the Preset window.

3.

Press MENU.

The MENU button will light in red and the Preset window will display the level mnemonic. The Current window will
show the audio mode for the left channel.

In Figure 6−145, the left audio channel is set to “Normal.”

Level

Menu

Clear

Prot/
Lock

Pre−

set

Take

CURRENT

PRESET

NORMAL

LEFT

4.

Toggle the left channel to the desired mode by pressing PRESET:

NORMAL − Use left audio for this channel

LEFT

LEFT (Left signal on Left channel)

MIX − Mix left and right on this channel

LEFT

RIGHT

LEFT (Left + Right signals on Left channel)

REVERSE − Cross opposite channel signal over to this channel

RIGHT

LEFT (Right signal on Left channel)