3com 5500 User Manual

120

HAPTER

15: R

OUTING

ONFIGURATION

UIDE

# Configure ABR route summarization to summarize the routes 30.1.1.0/24 and
30.1.2.0/24 in area 2 into 30.1.0.0/22.

[SwitchB-ospf-1] area 2

[SwitchB-ospf-1-area-0.0.0.2] abr-summary 30.1.0.0 255.255.252.0

[SwitchB-ospf-1-area-0.0.0.2] quit

ASBR route summarization configuration 1

This configuration is applicable when an ASBR needs to summarize the Type-5
LSAs or Type-7 LSAs. The following takes the ASBR route summarization
configuration on Switch D as an example.

Based on “OSPF basic configuration and area configuration” on page 118,
perform the following configuration:

# Configure ASBR route summarization to summarize the routes 1.1.4.0/24,
1.1.5.0/24, 1.1.6.0/24, and 1.1.7.0/24 into 1.1.4.0/22 and to prevent 1.1.3.0/24
from being advertised to any other area.

[SwitchD-ospf-1] asbr-summary 1.1.4.0 255.255.252.0

[SwitchD-ospf-1] asbr-summary 1.1.3.0 255.255.255.0 not-advertise

ASBR route summarization configuration 2

This configuration is applicable when the ABR in an NSSA area needs to translate
Type-7 LSAs into Type-5 LSAs and summarize the Type-5 LSAs.

Based on “OSPF basic configuration and area configuration” on page 118,
perform the following configuration:

# Switch A is the ABR of the NSSA area. Configure ASBR route summarization to
summarize the routes 2.1.4.0/24, 2.1.5.0/24, 2.1.6.0/24, and 2.1.7.0/24 into
2.1.4.0/22 and to prevent 2.1.3.0/24 from being advertised.

[SwitchA-ospf-1] asbr-summary 2.1.4.0 255.255.252.0

[SwitchA-ospf-1] asbr-summary 2.1.3.0 255.255.255.0 not-advertise

Complete Configuration

ABR route summarization configuration

Configure ABR route summarization on Switch B.

■

Perform the following configuration on Switch A.

vlan 100

vlan 200

interface Vlan-interface100

ip address 10.1.1.1 255.255.255.0

interface Vlan-interface200

ip address 20.1.1.1 255.255.255.0

ospf 1 router-id 1.1.1.1

area 0.0.0.1