3com Webcache 1000 (3C16115) User Manual

Page of 176
Rack-Mounting the Webcache
27
If the Webcache is installed in a 19-inch rack or closed assembly its local 
air temperature may be greater than room ambient temperature.
The air is as free from dust as possible.
The Webcache is installed in a clean, air conditioned environment.
Rack-Mounting the 
Webcache
The Webcache is 1U high and will fit in most standard 19-inch rack 
mounts.
CAUTION: The rear of the Webcache must be supported. This is best 
achieved through the use of a 19-inch 4-posted rack.
CAUTION: Disconnect all cables from the Webcache before continuing.
To rack-mount your Webcache:
Place the Webcache the right way up on a hard flat surface, with the 
front facing towards you.
Locate the Rack-Mounting Kit that is supplied with the Webcache. The 
Kit contains the items shown in Figure 4.
Figure 4   The Rack-Mounting Kit Contents
You must use the rails and screws supplied with the Rack-Mounting Kit. 
Damage caused to the Webcache by using incorrect rails and screws 
invalidates your warranty.
16 x
2 x
2 x
2 x
Screws
Front
Plates
Rack-Mounting
Brackets
Rack-Mounting
Rails
2 x
Adjustable
Brackets