3com Webcache 1000 (3C16115) User Manual

7 Slide the rack-mounting brackets on the sides of the Webcache into the 

rack-mounting rails.

8 Secure the front of the Webcache to the rack with the captive 

thumbscrews, as shown in Figure 8.

Figure 8   Attaching the Webcache to the Rack

9 Ensure that the ventilation holes in the Webcache are not obstructed.

The following sections describe how to get your Webcache powered-up 
and ready for operation.

Use the following sequence of steps to power-up the Webcache:

1 Plug the power cord into the power socket at the rear of the Webcache.

2 Plug the other end of the power cord into your power outlet.

3 The Webcache automatically powers-up, which takes approximately 

60-90 seconds. During power-up all of the LEDs light and the Power/Self 
test LED flashes green. When the Webcache has powered-up and is 
operating normally, the Power/Self test LED changes to non-flashing 
green.