3com DUA1770-0AAA04 User Manual
34
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
Setting Up
Overview
Overview
This section gives an overview of what you need to do to get your Switch
set up and ready for management when it is in its default state. The
whole setup process is summarised in
set up and ready for management when it is in its default state. The
whole setup process is summarised in
. Detailed procedural
steps are contained in the sections that follow. In brief, you need to:
■
Configure IP information manually for your Switch or view the
automatically configured IP information
automatically configured IP information
■
Prepare for your chosen method of management
Figure 12 Initial Switch Setup and Management Flow diagram
CAUTION: To protect your Switch from unauthorized access, you must
change all three default passwords as soon as possible, even if you do not
intend to actively manage your Switch. For more information on default
change all three default passwords as soon as possible, even if you do not
intend to actively manage your Switch. For more information on default
Plug and Play
Set
up
In
it
ia
l IP
In
fo
rm
a
ti
o
n
S
e
tu
p
Featur
e Management
Power Up the Switch.
IP Information is automatically configured.
See
Do you want to manually
configure the IP information?
Connect to a front
panel port and use the
Web Interface or
Command Line Interface.
How do you want to manage your Switch? See
SNMP
Command Line Interface
Connect via the
console port.
Web Interface
Connect over the
network via Telnet.
Connect over the
network.
How do you want to view the automatically
configured IP information?
How do you want to connect to the Switch?
Connect to the console
port and use the
Command Line
Interface.
Use 3Com Network
Supervisor (3NS).
Connect to the console
port and use the
Command Line
Interface.
Yes
No