Panasonic WJ-SX150A User Manual
84
■ Tour Sequence
This window configures the parameters of tour sequences:
the operating camera, dwell time*, preset position** in each
step.
Each sequence has up to 64 steps, and up to 32
sequences are configurable.
The configuration of a tour sequence can be copied to
another one.
the operating camera, dwell time*, preset position** in each
step.
Each sequence has up to 64 steps, and up to 32
sequences are configurable.
The configuration of a tour sequence can be copied to
another one.
* the display time of a camera image
** the panning/tilting position which has been preset in
advance
Notes:
• Enter the parameters from Step 1 in a sequential order.
If you skip a step, it will result in an error.
• After selecting a camera number, be sure to select the
dwell time, too. If you skip either of them, the message
requesting the parameter entry will appear.
requesting the parameter entry will appear.
● How to Display
1. To display this window, click on the
(Tour
Sequence) button in the main window (p. 80). Or click
on the
on the
(Tour Sequence) button in the Group
Sequence window.
2. To select Tour 1 to 32, click on a desired drop-down
menu in the Tour Sequence window.
3. After configuring 16 steps, click on a tab followed by
next 16 steps.
● Parameters
LCN
Selects the operating camera in each step.
The camera is selectable from LCN 1 to 99. After selecting
LCN, select the time for Dwell.
Note: Configure Step 1 to the last step in a sequential
The camera is selectable from LCN 1 to 99. After selecting
LCN, select the time for Dwell.
Note: Configure Step 1 to the last step in a sequential
order. If there is a skipped step whose LCN and/or
Dwell is “- -“, that may cause an error. Then, the mes-
sage will appear to ask you to select both LCN and
Dwell.
Dwell is “- -“, that may cause an error. Then, the mes-
sage will appear to ask you to select both LCN and
Dwell.
Preset
Selects the preset position of the operating camera.
The preset position is selectable from Preset 1 to 64.
Note: Refer to p. 109 Program Preset Position for details of
The preset position is selectable from Preset 1 to 64.
Note: Refer to p. 109 Program Preset Position for details of
how to program preset positions.
Dwell
Selects the dwell time of the operating camera.
The dwell time is selectable from 1 to 30 seconds (by a
second). Set "--" for Dwell when you have selected "--" for
Cam.
The dwell time is selectable from 1 to 30 seconds (by a
second). Set "--" for Dwell when you have selected "--" for
Cam.
(DELETE) button
Deletes the configuration of all the steps of the selected
tour sequence.
tour sequence.
(COPY) button
Copies the configuration of all the steps of the selected tour
sequence to the another tour.
sequence to the another tour.
(PASTE) button
Pastes the cut or copied configuration to another tour
sequence.
sequence.
(Save Exit) button
Saves the configuration and closes the Tour Sequence win-
dow.
dow.
(Cancel Exit) button
Cancels the configuration and closes the Tour Sequence
window.
window.