Panasonic WJ-SX150A User Manual

90

This stands for a recorder activated with an alarm signal.
(Refer to the diagram in p. 68.)

Select the unit whose alarm port is activated with an alarm
signal. Master or Slave 1/2/3/4 is selectable.

Select the alarm port number. 1 to 16 is selectable. To
deactivate the alarm event, select “- -”.

• If having selected a tour sequence for a monitor, anoth-

er tour number or spot camera will not be available
when selecting the monitor for another alarm event.
That will result in an error.

• Each Alarm Port and Num can be assigned to only one

ALM. When you enter the same Alarm Port and Num
more than one time, a message will appear. If you click
on “Yes”, the newer will be activated and the older will
be changed to “- -“. If you click on “No”, the changed
parameters will return to the former state.

Saves the configuration and closes the Alarm Event win-
dow.

Cancels the configuration and closes the Alarm Event win-
dow.

■ Alarm Port

This window configures the parameters of alarm inputs.

● How to Display

To display this window, click on the 

(Alarm Port) but-

ton in the main window (p. 80).

● Parameters

Select the desired alarm input parameter to assign in each
alarm port's drop-down menu.

Normally Open: Normally Open contact.
Normally Close: Normally Close contact
Time Adjust: Time adjustment signal

Saves the configuration and closes the Alarm Input window.

Cancels the configuration and closes the Alarm Input win-
dow.

■ Operator Registration

This window configures the parameters of each operator:
the ID, password, level, priority and camera access.

Note: Before configuring this window, check on the

restrict level of each operation in the Level Table
window.

● How to Display

To display this window, click on the 

(Operator

Registration) button in the main window (p. 80).