3com 3CRWXR10095A User Manual

C

HAPTER

 6: C

ONFIGURING

 WX S

YSTEM

 P

ARAMETERS

This option is available only if the switch is running and can be reached 
through the network by 3WXM Services. This option also requires the 
Managed option for the switch to be enabled. (See step 6 in “Modifying 
Basic Switch Parameters” on page 170.)

1 Select the Configuration tool bar option.

2 In the Organizer panel, select the WX switch. 

3 In the Task List panel, select Launch Browser. 

You can configure and display information for the following port 
parameters:

„

Name

„

State

„

Type (network, MAP, or wired authentication)

„

Speed and autonegotiation

„

Power over Ethernet (PoE) state

„

Media type (gigabit Ethernet ports only)

„

Load sharing (see “Viewing and Changing Port Groups” on page 184)

1 Select the Configuration tool bar option.

2 In the Organizer panel, click the plus sign next to the WX switch. 

3 Click the plus sign next to System.

4 Select Ports.

The ports and their configuration settings appear in the Content panel. 
The 10/100 Ethernet ports and the gigabit Ethernet ports (if the switch 
has them) are listed separately.

To change settings for a port, edit the row of information for the port. 

1 In the Name box, type a name for the port (1 to 16 alphanumeric 

characters, with no spaces or tabs).

2 To enable the port, select Enabled. To disable the port, clear Enabled. By 

default, the port is enabled.