3com 3CRWXR10095A User Manual
Viewing and Configuring Wireless Services
251
5 Select the SSID type from the SSID Type drop-down list:
Encrypted—Traffic on the SSID is encrypted.
Clear—Traffic on the SSID is unencrypted.
6 Click Next.
If you selected Clear in step 5, go to step 15.
7 Select the security modes you want the SSID to support. You can select
one or more of the following:
RSN (WPA2)
WPA
Static WEP
8 Click Next.
9 If you selected RSN or WPA in step 7, you can select whether to use
dynamically generated keys, or static keys based on a passphrase.
To use dynamically generated keys, leave the Pre-shared Key box
blank and go to step 10.
blank and go to step 10.
To use static keys, type a string from 8 to 63 characters long in the
Pre-shared Key box and click Generate.
Pre-shared Key box and click Generate.
10 Click Next.
11 Select the encryption algorithms to use:
AES (CCMP)—Usually used with RSN (WPA2)
TKIP—Usually used with WPA
WEP-104—Used with dynamic WEP
WEP-40—Used with dynamic WEP
12 Click Next.
13 If you selected Static WEP in step 7, specify WEP keys. Otherwise, go to
For each key (up to four), type the key value in the corresponding key
box.
box.
By default, data in unicast and multicast packets are encrypted using
WEP key 1. To use another key for either type of packet, select the key
number in the WEP Unicast Key Index or WEP Multicast Key Index box.
WEP key 1. To use another key for either type of packet, select the key
number in the WEP Unicast Key Index or WEP Multicast Key Index box.