3com 3CRWXR10095A User Manual

9 Select the Distributed MAPs for which the location policy is applied and 

click Add. 

10 Click Next.

11 In the Action list, select one of the following:

„

Permit—Allows access if the conditions in the location policy rule are 
matched.

If you select Permit, you must specify at least one of following:

„

In ACL Name—ACL applies to packets sent to the WX (See 
step 12.)

„

Out ACL Name—ACL applies to packets sent from the WX (See 
step 13.)

„

VLAN Name (See step 14.)

„

Deny—Refuses network access if the conditions in the location policy 
rule are matched. 

If you select Deny, go to step 14.

12 In the In ACL Name box, type the name of the input ACL that applies if 

the location policy rules are matched. 

The ACL name can be 1 to 32 alphanumeric characters, with no spaces or 
tabs. The name can include hyphens (-), underscores (_), or periods (.). 
ACL names are case-sensitive and must begin with a letter. Do not 
include any of the following terms in the name: all, default-action, 
map, help, editbuffer.

13 In the Out ACL Name box, type the name of the output ACL that applies 

if the location policy rules are matched. 

14 In the VLAN Name box, type the name of the VLAN to which users are 

assigned if the location policy rules are matched. The name can be 
1 to 32 alphanumeric characters, with no spaces or tabs.

15 Click Finish.