3com 3C39024 User Manual

Page of 66
4
S
YSTEM
 P
OWER
 U
P
This chapter contains:
®
 II Switch 
3900 system
“Power Up” instructions the Switch 3900 system
For information on troubleshooting the system during 
power up, see Chapter 6.
Power Options
You have three options for how to power up your 
Switch 3900 system.
Place the system near a power receptacle. You can 
power down the system only by removing the power 
cord from the power source.
AC Power Cord
You can connect the system directly to a wall 
receptacle with the AC power cord that is shipped 
with the system. See “Power Up” for details. 
Optional Advanced Redundant Power System
To protect against internal power supply failures, you 
can connect a 3Com Advanced Redundant Power 
System Type 2 (RPS) to the Switch 3900 system. The 
RPS connector is located on the rear panel. 
CAUTION: Connect only a 3Com Advanced 
Redundant Power System Type 2 to this connector, 
using the external Type 2 Y cable that is shipped with 
the RPS.
For details, follow the installation instructions and 
safety precautions that are shipped with the 
redundant power system.
Optional Uninterruptible Power System
To protect against external power interruption from 
brownouts, blackouts, surges, and spikes, connect an 
uninterruptible power system (UPS) to the Switch 
3900 system. Connect only a 3Com Uninterruptible 
Power System. Use the appropriate UPS for your 
region: 
United States
European/International
Japan
To install the UPS, follow the instructions and safety 
precautions that are shipped with the UPS.