3com WX3000 User Manual

 

1-13 

[device] vlan 100 

# Configure the default VLAN ID of GigabitEthernet 1/0/1 as 100.  

[device-GigabitEthernet1/0/1] port trunk pvid vlan 100 

Symptom: Default VLAN ID configuration failed.  

Solution: Take the following steps.  

z 

Use the display interface or display port command to check if the port is a trunk port or a hybrid 

port. If not, configure it as a trunk port or a hybrid port.  

z 

Configure the default VLAN ID.