3com WX3000 User Manual

 

1-16 

In a network containing devices with both GVRP and MSTP enabled, GVRP packets are forwarded 
along the CIST. If you want to advertise packets of a specific VLAN through GVRP, be sure to map the 
VLAN to the CIST when configuring the MSTP VLAN mapping table (the CIST of a network is spanning 
tree instance 0).  

 

The role (root, branch, or leaf) of each device in each spanning tree instance is determined. 

Follow these steps to configure an MST region: 

Enter system view 

— 

Enter MST region view 

— 

Configure the name of the MST 
region 

region-name name

 

Required 
The default MST region name 
of a device is its MAC address.

 instance-id vlan 

vlan-list 

Configure the VLAN mapping 
table for the MST region 

 modulo

Required 
Both commands can be used to 
configure VLAN mapping 
tables. 
By default, all VLANs in an 
MST region are mapped to 
spanning tree instance 0. 

Configure the MSTP revision 
level for the MST region 

 level 

Required 
The default revision level of an 
MST region is level 0. 

Activate the configuration of the 
MST region manually 

Required 

Display the configuration of the 
current MST region 

Optional 

Display the currently valid 
configuration of the MST region 

You can execute this command 
in any view. 

 

NTDP packets sent by devices in a cluster can only be transmitted within the instance where the 
management VLAN of the cluster resides.