3com WX3000 User Manual

 

2-2 

Creating an ISP Domain and Configuring 
Its Attributes 

Required 

Configuring separate AAA schemes 

Required 

Configuring an AAA Scheme for an ISP 
Domain 

Required 

z 

With separate AAA schemes, you 
can specify authentication, 
authorization and accounting 
schemes respectively.  

z 

You need to configure RADIUS or 
HWATACACS before performing 
RADIUS or HWTACACS 
authentication. 

Optional 

Configuring the Attributes of a Local 
User 

Optional 

AAA 
configuration 

Optional 

 

Follow these steps to create an ISP domain and configure its attributes: 

Enter system view 

— 

Configure the form of the 
delimiter between the user 
name and the ISP domain 
name 

domain delimiter { at | dot } 

Optional 

By default, the delimiter 
between the user name and the 
ISP domain name is “@”. 

Create an ISP domain or set an 
ISP domain as the default ISP 
domain 

domain { isp-name | default 
{ disable | enable isp-name } }

Required 

If no ISP domain is set as the 
default ISP domain, the ISP 
domain "system" is used as the 
default ISP domain. 

Set the status of the ISP 
domain 

state { active | block } 

Optional 

By default, an ISP domain is in 
the active state, that is, all the 
users in the domain are allowed 
to request network service. 

Set the maximum number of 
access users that the ISP 
domain can accommodate 

access-limit { disable | enable 
max-user-number } 

Optional 

By default, there is no limit on 
the number of access users 
that the ISP domain can 
accommodate. 

Set the idle-cut function 

idle-cut { disable | enable 
minute flow } 

Optional 

By default, the idle-cut function 
is disabled.