3com WX3000 User Manual

 

1-27 

# Configure a device to adopt SP+SDWRR combination for queue scheduling, assigning queue 3, 

queue 4, and queue 5 to WRR scheduling group 1, with the weigh of 20, 20 and 30; assigning queue 0, 

queue 1, and queue 2 to WRR scheduling group 2, with the weight 20, 20, and 40; using SP for 

scheduling queue 6 and queue 7. Display the configuration information after configuration. 

Configuration procedure: 

<device> system-view 

[device] queue-scheduler wrr group1 3 20 4 20 5 30 group2 0 20 1 20 2 40 

[device] display queue-scheduler 

QID:   scheduling-group     weight 

----------------------------------- 

  0 :   wrr , group2           20 

  1 :   wrr , group2           20 

  2 :   wrr , group2           40 

  3 :   wrr , group1           20 

  4 :   wrr , group1           20 

  5 :   wrr , group1           30 

  6 :   sp                      0 

  7 :   sp                      0  

Refer to 

 for information about traffic accounting. 

The ACL rules for traffic classification are defined. Refer to the ACL module  of this manual for 

information about defining ACL rules. 

You can collect traffic statistics or clear traffic statistics on all the packets matching specific ACL rules, or 

on packets that match specific ACL rules and are of a VLAN, of a port group, or pass a port.  

Follow these steps to collect traffic statistics on all the packets matching specific ACL rules: 

Enter system view 

system-view 

— 

Collect the statistics on the 
packets matching specific ACL 
rules 

traffic-statistic inbound acl-rule

Required 

Clear the statistics on the packets 
matching specific ACL rules 

reset traffic-statistic inbound 
acl-rule 

Optional 

 

Follow these steps to collect traffic statistics on packets that are of a VLAN and match specific ACL 

rules: 

Enter system view 

system-view 

—