3com WX3000 User Manual

 

1-18 

[Switch] info-center enable 

# Disable the function of outputting information to the console channels. 

[Switch] undo info-center source default channel console  

# Enable log information output to the console. Permit ARP and IP modules to output log information 

with severity level higher than informational to the console. 

[Switch] info-center console channel console 

[Switch] info-center source arp channel console log level informational debug state off trap 

state off 

[Switch] info-center source ip channel console log level informational debug state off trap 

state off 

# Enable terminal display. 

<Switch> terminal monitor 

<Switch> terminal logging 

z 

As shown in 

, the device is in the time zone of GMT+ 08:00:00. 

z 

The time stamp format of output log information is date. 

z 

UTC time zone will be added to the output information of the information center. 

Figure 1-4 Network diagram 

Internet

PC

Switch

 

 

# Name the local time zone z8 and configure it to be eight hours ahead of UTC time. 

<Switch> clock timezone z8 add 08:00:00 

# Set the time stamp format of the log information to be output to the log host to date. 

<Switch> system-view 

System View: return to User View with Ctrl+Z. 

[Switch] info-center timestamp loghost date 

# Configure to add UTC time to the output information of the information center. 

[Switch] info-center timestamp utc