3com WX3000 User Manual

 

1-3 

Enabling the PoE Feature on a Port 

Required 

Optional 

Setting PoE Management Mode and PoE Priority of a Port 

Optional 

Optional 

Optional 

Upgrading the PSE Processing Software Online 

Optional 

Displaying and Maintaining PoE Configuration 

Optional 

 

Follow these steps to enable the PoE feature on a port: 

Enter system view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Enable the PoE feature on a port 

Required 

 

z 

By default, the PoE function on a port is enabled by the default configuration file when the device is 

delivered. 

z 

If you delete the default configuration file without specifying another one, the PoE function on a port 

will be disabled after you restart the device. 

 

The maximum power that can be supplied by each Ethernet electrical port of a PoE-enabled device to 

its PD is 25,000 mW. In practice, you can set the maximum power on a port depending on the actual 

power of the PD, in the range of 1,000 to 25,000 mW and in the granularity of 1 mW. 

Follow these steps to set the maximum output power on a port: 

Enter system view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Set the maximum output power 
on the port 

poe max-power max-power 

Required 

25,000 mW by default.