3com S330 User Manual

Configuring the T1/E1 interface involves the following tasks:

n

Configuring the four individual T1/E1 ports

n

Setting up and configuring UNI and/or IMA groups (if desired)

n

Viewing IMA link and group status

n

Configuring the T1/E1 card

To configure the individual T1/E1 ports, follow these steps:

1 From the Configuration Management menu, select [1] Manage Card to display the 

List Card menu, shown earlier in Figure 54.

2 From the List Card menu, select [3] DS1 UNI to open the T1 (DS1) UNI or E1 UNI 

Configuration menu. Figure 58 shows the T1 (DS1) UNI Configuration menu. The 
E1 UNI Configuration menu is the same.

Figure 58   T1 (DS1) UNI Configuration Menu

3 Select [1] Port Configuration to open the T1 (DS1)/E1 UNI Port Configuration 

Selection menu. Figure 59 shows the T1 (DS1) UNI Port Selection menu. The E1 
UNI Port Configuration menu is the same.