3com S330 User Manual
3
G
ETTING
S
TARTED
This chapter tells you how to initialize and prepare SuperStack
®
II PathBuilder
®
S330 and SuperStack
®
II PathBuilder
®
S310 WAN access switches (PathBuilder
S330/S310) for operation and how to use the PathBuilder S330/S310 menus. It
contains the following sections:
contains the following sections:
n
n
n
n
n
Logging On
You enter initial configuration information via the local user interface. This
interface is presented on a VT100 terminal connected to the RS-232 (console) port
on the front of the PathBuilder S330/S310, as shown in Figure 29. See Chapter 2
for details about connecting the VT100 terminal.
interface is presented on a VT100 terminal connected to the RS-232 (console) port
on the front of the PathBuilder S330/S310, as shown in Figure 29. See Chapter 2
for details about connecting the VT100 terminal.
Set the terminal for the following:
n
9600 baud
n
no parity
n
8 data bits
n
1 stop bit
Figure 29 NMS Terminal Connection Options
LAN
VT-100
NMS Terminal
RS-232
10BASE-T