3com S330 User Manual
Performing Initial System Configuration
67
The IP address does not take effect until you apply your changes by selecting
[2] Apply IP Configuration Changes from the Local Host IP Configuration menu
(step 5 above).
[2] Apply IP Configuration Changes from the Local Host IP Configuration menu
(step 5 above).
Configuring Trap Clients
Trap clients are the network management stations to which you want the
PathBuilder S330/S310 to send traps. You can specify up to four trap clients. To
configure trap clients, follow these steps:
PathBuilder S330/S310 to send traps. You can specify up to four trap clients. To
configure trap clients, follow these steps:
1 From the Manage IP Network Configuration menu, select [2] Trap Client
Configuration to display the Trap Client Configuration menu, shown in Figure 39.
Figure 39 Trap Client Configuration Menu
2 Select the number corresponding to the trap client you want to configure.
Figure 40 shows the menu for configuring trap client 1.
Figure 40 Trap Client 1 Configuration Menu