3com 4400 (3C17204) User Manual

Page of 90
Setting Up Web Interface Management
53
For further information on generating a host key on your switch and 
transferring keys to the Switch using TFTP server please refer to 
Chapter 11 of the “SuperStack 3 Switch Implementation Guide”.
Setting Up Web 
Interface 
Management 
This section describes how you can set up web interface management 
over the network.
Pre-requisites
Ensure you have already set up the Switch with IP information as 
described in “Setting Up Overview” opage 36.
Ensure that the Switch is connected to the network using a Category 
5 twisted pair Ethernet cable with RJ-45 connectors.
A suitable Web browser.
Choosing a Browser
To display the web interface correctly, use one of the following Web 
browser and platform combinations:
Table 8   Supported Web Browsers and Platforms
For the browser to operate the web interface correctly, JavaScript™ and 
Cascading Style Sheets must be enabled on your browser. These features 
are enabled on a browser by default. You will only need to enable them if 
you have changed your browser settings.
To enable style sheets in Netscape Navigator 4.76 on Solaris 2.6, open 
Netscape Navigator and select Edit > Preferences > Fonts. Select the Use 
document-specified fonts, including Dynamic Fonts
 radio button. You 
should also set the font sizes as follows:
Windows 95 Windows 98
Windows NT 
4
Windows 
2000
Windows XP
Solaris
2.6
Netscape 4.76
Netscape 6.2
Netscape 7.0
Internet Explorer 5.5
Internet Explorer 6.0
DUA1720-3AAA07.book  Page 53  Wednesday, March 17, 2004  1:14 PM