3com 4050 User Manual
20
C
HAPTER
1: I
NTRODUCING
THE
3C
OM
S
WITCH
4050
AND
4060
Default Settings
Table 5
shows the default settings for the 3Com Switch 4050 and 4060.
If you initialize one of the Switch units, it is returned to these defaults.
Table 5 Default Settings
Feature
3Com Switch 4050/4060
Port Status
Enabled
Port Speed
Auto-negotiated
Duplex Mode
Auto-negotiated
Flow Control
Auto-negotiated
Broadcast Storm Control
Enabled
High threshold: 3000 broadcast frames per
second — Notify and filter
Low threshold: 1500 broadcast frames per
second — Notify and unfilter
second — Notify and filter
Low threshold: 1500 broadcast frames per
second — Notify and unfilter
Virtual LANs (VLANs)
All ports belong to the untagged Default VLAN
(VLAN 1)
(VLAN 1)
Multicast Filtering
IGMP filtering enabled
Rapid Spanning Tree Protocol
Enabled
Link Aggregation Control
Protocol (LACP)
Protocol (LACP)
Enabled
Spanning Tree Protocol
Enabled
Smart Auto-sensing
Enabled
IP Address
169.254.100.100
*
* This default IP address is used if the unit is operating in standalone mode, and/or no other
Switches on the network have this IP address. If this default IP address is already in use then the
Switch detects this and configures itself with an IP address in the range 169.254.1.0 to
169.254.254.255.
Switch detects this and configures itself with an IP address in the range 169.254.1.0 to
169.254.254.255.
Subnet Mask
255.255.0.0