3com WX1200 User Manual
112
C
HAPTER
5: VLAN C
OMMANDS
Table 26 describes the fields in this display.
See Also
Table 26 Output for display vlan config
Field
Description
VLAN
VLAN number.
Name
VLAN name.
Admin Status Administrative status of the VLAN:
Down — The VLAN is disabled.
Up — The VLAN is enabled.
VLAN State
Link status of the VLAN:
Down — The VLAN is not connected.
Up — The VLAN is connected.
Tunl Affin
Tunnel affinity value assigned to the VLAN.
Port
Member port of the VLAN. The port can be a physical port or a
virtual port.
virtual port.
Physical ports are 10/100 Ethernet or gigabit Ethernet ports on
the WX switch, and are listed by port number.
the WX switch, and are listed by port number.
Virtual ports are tunnels to other WX switches in a mobility
domain, and are listed as follows: t:ip-addr, where ip-addr is the
system IP address of the WX switch at the other end of the tunnel.
domain, and are listed as follows: t:ip-addr, where ip-addr is the
system IP address of the WX switch at the other end of the tunnel.
Note: This field can include MAP access ports and wired
authentication ports, because MSS dynamically adds these ports to a
VLAN when handling user traffic for the VLAN.
authentication ports, because MSS dynamically adds these ports to a
VLAN when handling user traffic for the VLAN.
Tag
Tag value assigned to the port.
Port State
Link state of the port:
Down — The port is not connected.
Up — The port is connected.