3com WX1200 User Manual
ping
157
Because the WX switch adds header information, the ICMP packet size is
8 bytes larger than the size you specify.
8 bytes larger than the size you specify.
source-ip ip-addr
— IP address, in dotted decimal notation, to use
as the source IP address in the ping packets.
source-ip vlan-name
— VLAN name to use as the ping source. MSS
uses the IP address configured on the VLAN as the source IP address in
the ping packets.
the ping packets.
Defaults
count — 5.
dnf — Disabled.
interval — 100 (one tenth of a second)
size — 56.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To stop a ping command that is in progress, press Ctrl+C.
Examples — The following command pings a WX switch that has IP
address 10.1.1.1:
address 10.1.1.1:
WX1200# ping 10.1.1.1
PING 10.1.1.1 (10.1.1.1) from 10.9.4.34 : 56(84) bytes of data.
64 bytes from 10.1.1.1: icmp_seq=1 ttl=255 time=0.769 ms
64 bytes from 10.1.1.1: icmp_seq=2 ttl=255 time=0.628 ms
64 bytes from 10.1.1.1: icmp_seq=3 ttl=255 time=0.676 ms
64 bytes from 10.1.1.1: icmp_seq=4 ttl=255 time=0.619 ms
64 bytes from 10.1.1.1: icmp_seq=5 ttl=255 time=0.608 ms
--- 10.1.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0 errors, 0% packet loss
PING 10.1.1.1 (10.1.1.1) from 10.9.4.34 : 56(84) bytes of data.
64 bytes from 10.1.1.1: icmp_seq=1 ttl=255 time=0.769 ms
64 bytes from 10.1.1.1: icmp_seq=2 ttl=255 time=0.628 ms
64 bytes from 10.1.1.1: icmp_seq=3 ttl=255 time=0.676 ms
64 bytes from 10.1.1.1: icmp_seq=4 ttl=255 time=0.619 ms
64 bytes from 10.1.1.1: icmp_seq=5 ttl=255 time=0.608 ms
--- 10.1.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0 errors, 0% packet loss
See Also