3com WX1200 User Manual
368
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must configure the service profile before you can map it to
a radio profile. You can map the same service profile to more than one
radio profile.
a radio profile. You can map the same service profile to more than one
radio profile.
You must disable all radios that use a radio profile before you can change
parameters in the profile. Use the set radio-profile mode command.
parameters in the profile. Use the set radio-profile mode command.
Examples — The following command maps service-profile wpa_clients
to radio profile rp2:
to radio profile rp2:
WX4400# set radio-profile rp2 service-profile wpa_clients
success: change accepted.
success: change accepted.
See Also
web-aaa-form
Not configured For WebAAA users, serves the default
login web page or, if configured, the
SSID-specific login web page.
SSID-specific login web page.
wep key-index
No keys
defined
defined
Uses dynamic WEP rather than static WEP.
If you configure a WEP key for static WEP,
MSS continues to also support dynamic
WEP.
MSS continues to also support dynamic
WEP.
wep active-
multicast-index
multicast-index
1
Uses WEP key 1 for static WEP encryption
of multicast traffic if WEP encryption is
enabled and keys are defined.
of multicast traffic if WEP encryption is
enabled and keys are defined.
wep active-unicast-
index
index
1
Uses WEP key 1 for static WEP encryption
of unicast traffic if WEP encryption is
enabled and keys are defined.
of unicast traffic if WEP encryption is
enabled and keys are defined.
wpa-ie
disable
Does not use the WPA IE in transmitted
frames.
frames.
Table 67 Defaults for Service Profile Parameters (continued)
Parameter
Default Value
Radio Behavior When Parameter Set
to Default Value
to Default Value