3com WX1200 User Manual
576
C
HAPTER
20: F
ILE
M
ANAGEMENT
C
OMMANDS
Examples — The following command shows configuration information
for VLANs:
for VLANs:
WX4400# display config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WX4400
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WX4400
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also
display version
Displays software and hardware version information for an WX switch
and, optionally, for any attached MAP access points.
and, optionally, for any attached MAP access points.
Syntax —
display version [details]
details
— Includes additional software build information and
information about the MAP access points configured on the WX
switch.
switch.
Defaults — None
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays version information for a
WX switch:
WX switch:
WX1200# display version
Mobility System Software, Version: 4.1.0 QA 67
Copyright (c) 2002, 2003, 2004, 2005 3Com Corporation. All rights
reserved.
Copyright (c) 2002, 2003, 2004, 2005 3Com Corporation. All rights
reserved.
Build Information: (build#67) TOP 2005-07-21 04:41:00
Model: WX
Hardware
Mainboard: version 24 ; revision 3 ; FPGA version 24
PoE board: version 1 ; FPGA version 6
Serial number 0321300013
Model: WX
Hardware
Mainboard: version 24 ; revision 3 ; FPGA version 24
PoE board: version 1 ; FPGA version 6
Serial number 0321300013