3com WX1200 User Manual
620
C
HAPTER
24: B
OOT
P
ROMPT
C
OMMANDS
autoboot
Displays or changes the state of the autoboot option. The autoboot
option controls whether a WX switch automatically boots a system image
after initializing the hardware, following a system reset or power cycle.
option controls whether a WX switch automatically boots a system image
after initializing the hardware, following a system reset or power cycle.
Syntax —
autoboot [ON | on | OFF | off]
ON
— Enables the autoboot option.
on
— Same effect as
ON
.
OFF
— Disables the autoboot option.
off
— Same effect as
OFF
.
Defaults — The autoboot option is enabled by default.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the current setting of the
autoboot option:
autoboot option:
boot> autoboot
The autoboot flag is on.
The autoboot flag is on.
See Also
Boot Profile Management display on page 628
Boot Profile
Management, cont.
Management, cont.
Diagnostics
Table 111 Boot Prompt Commands by Usage (continued)
Type
Command