3com 4210 18-Port User Manual

Page of 74
Introduction to the Switch 4210 Family PWR Switches
9
Rear panel
Figure 4   The Switch 4210 9-port PWR model’s rear panel
Side panel
Each Switch 4210 9-port PWR provides a security slot through which you can lock 
the device together with an irremovable object to prevent theft. The security slot is 
located on the left side panel, as shown in Figure 7.
n
If the left screw hole above the security slot is used, the security slot cannot be 
used.
Power system
Switch 4210 PWR 9-port units are able to power attached devices using standard 
802.3af Power over Ethernet. The total available power for PoE on this model is 
70W, enough to power four ports at full 15.4W required of the PoE standard. 
Each Switch 4210 9-port PWR unit supports AC input.
Rated Voltage Range: 100 VAC to 240 VAC, 50 Hz/60 Hz
Input voltage range: 90 VAC to 264 VAC, 47 HZ to 63 Hz
Cooling system
The Switch 4210 9-port PWR units each run two fans for heat dissipation.
Switch 4210 PWR
18-port
Front panel
Switch 4210s 18-port PWR each provide sixteen 10/100Base-TX autosensing 
Ethernet ports, two 10/100/1000Base-T Ethernet ports, two 100/1000Base SFP 
ports, and one Console port. Each SFP port and the corresponding 
10/100/1000BASE-T Ethernet port form a Combo port. For each Combo port, 
either the SFP port or the corresponding 10/100/1000BASE-T Ethernet port can be 
used at a time.
Figure 5 shows the front panel of a Switch 4210 18-port PWR.
( 1 ) 
(1) AC power socket 
(