3com 4500 PWR 50-PORT User Manual

: V 1 security mode.

: V 2 security mode.

: V 3 security mode.

: The user name, ranging from 1 to 32 bytes.

: The corresponding group name of the user, ranging from 1 to 32 

bytes.

: Specifies the security level to "to be authenticated"

: Specifies the authentication protocol as HMAC-MD5-96.

: Specifies the authentication protocol as HMAC-SHA-96.

: Authentication password, character string, ranging from 1 to 64 

bytes.

: Specifies the security level as encryption.

: Specifies the DES encryption protocol.

: Encryption password, character string, ranging from 1 to 64 

bytes.

 

: The number identifier of basic number-based ACLs, ranging 

from 2000 to 2999.

: Local entity user.

: Specifies the engine ID related to the user.

: Engine ID character string.

Using the 

 command, you can add a new user to an SNMP 

group, and reference the ACL to perform ACL control to the network 
management users by acl acl-number. Using the 

command, you can remove the user from the related SNMP group as well as the 
configuration of the ACL control of the user.

Add a user "John" to the SNMP group "Mygroup". Specify the security level to 
"to be authenticated", the authentication protocol to HMAC-MD5-96 and the 
authentication password to "hello", and reference the ACL 2002 to perform ACL 
control to the network management users (basic ACL 2002 has already been 
defined).

<4500>system-view

System View: return to User View with Ctrl+Z