3com 4500 PWR 50-PORT User Manual
348
C
HAPTER
12: U
SING
S
YSTEM
M
ANAGEMENT
C
OMMANDS
Use the
undo clock timezone
command to return to the default, which is
Universal Time Coordinated (UTC).
Use the
display clock
command to check the summer time settings.
Related command:
clock summer-time
Example
To set the local time zone as zone 5, and configure the local time to be 5 hours
ahead of UTC, enter the following:
ahead of UTC, enter the following:
<SW4500>clock timezone z5 add 05:00:00
sysname
Syntax
sysname sysname
undo sysname
View
System view
Parameter
sysname:
Specify the hostname with a character string with the length ranging
from1 to 30 characters.
Description
Use the
sysname
command to set the system name of the Switch.
Using
undo sysname
command, you can restore the default value of the system
name.
By default, the system name of the Switch is SW4500.
Changing the system name of the Switch will affect the prompt of the command
line interface. For example, the system name of the Switch is SW4500, and the
prompt in user view is
line interface. For example, the system name of the Switch is SW4500, and the
prompt in user view is
<SW4500>
.
Example
Set the hostname of the Switch to be LANSwitch.
<5500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]sysname LANSwitch
[LANSwitch]
System Status and
System Information
Display Commands
System Information
Display Commands
This sections describes the system status and system information display
commands on your Switch 4500.
commands on your Switch 4500.
display clock
Syntax
display clock