3com 4500 PWR 50-PORT User Manual

■

The final statistics, including number of sent packets, number of response 
packets received, percentage of non-response packets and 
minimal/maximum/average value of response time.

If the network transmission rate is too low to increase the response message 
timeout.

For the related commands, see 

.

Check whether the host 202.38.160.244 is reachable.

<SW4500>ping 202.38.160.244

ping 202.38.160.244 : 56 data bytes

Reply from 202.38.160.244 : bytes=56 sequence=1 ttl=255 time = 1ms

Reply from 202.38.160.244 : bytes=56 sequence=2 ttl=255 time = 2ms

Reply from 202.38.160.244 : bytes=56 sequence=3 ttl=255 time = 1ms

Reply from 202.38.160.244 : bytes=56 sequence=4 ttl=255 time = 3ms

Reply from 202.38.160.244 : bytes=56 sequence=5 ttl=255 time = 2ms

--202.38.160.244 ping statistics--

5 packets transmitted

5 packets received

0% packet loss

round-trip min/avg/max = 1/2/3 ms

Use the remote-ping command to specify remote-ping test class.

[ count | destination-ip | display | frequency | 

msdp-tracert | mtracert | ping | quit ]

Specifies remote-ping probe number in one test.

Specifies remote-ping class destination ip address.

Displays current system information.

Specifies remote-ping interval time between two 
remote-ping tests.

Specifies MSDP trace route to source RP.

Traces route to multicast source.

Ping function.

Exits from current command view.

[5500-EI]remote-ping