3com 4500 PWR 50-PORT User Manual
410
C
HAPTER
12: U
SING
S
YSTEM
M
ANAGEMENT
C
OMMANDS
Description
Use the
ntp-service broadcast-server command
to configure an Ethernet
switch to operate in the NTP broadcast server mode and send NTP broadcast
messages through the current interface.
messages through the current interface.
Use the
undo ntp-service broadcast-server
command to remove the
configuration.
By default, no Ethernet switch operates in the NTP broadcast server mode.
Example
Configure the switch to send NTP broadcast messages through Vlan-interface1
and use authentication key 4 for encryption, and set the NTP version number to 3.
and use authentication key 4 for encryption, and set the NTP version number to 3.
<SW4500> system-view
System View: return to User View with Ctrl+Z.
[SW4500] interface Vlan-interface 1
[SW4500-Vlan-interface1] ntp-service broadcast-server
authentication-key 4 version 3
ntp-service in-interface
disable
Syntax
ntp-service in-interface disable
undo ntp-service in-interface disable
View
VLAN interface view
Parameter
None
Description
Use the ntp-service in-interface disable command to disable the interface from
receiving NTP messages.
receiving NTP messages.
Use the undo ntp-service in-interface disable command to enable the interface to
receive NTP messages.
receive NTP messages.
By default, the interface can receive NTP messages.
Example
Disable Vlan-interface1 from receiving NTP messages.
<SW4500> system-view
System View: return to User View with Ctrl+Z.
[SW4500] interface Vlan-interface 1
[SW4500-Vlan-interface1] ntp-service in-interface disable
ntp-service
max-dynamic-sessions
Syntax
ntp-service max-dynamic-sessions
number