3com 4500 26-PORT User Manual

Related command: 

.

To configure the relay destination server with IP address 192.1.1.2, enter the 
following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]interface vlan-interface 1

[4500-Vlan-interface1]udp-helper server 192.1.1.2

This section describes the commands you can use to configure and manage the IP 
Performance Configuration operations on your Switch 4500.

Any view

none

Use the 

 command to view the summary of the forwarding 

information base. The information includes: destination address/mask length, next 
hop, current flag, timestamp and outbound interface.

To display the summary of the Forwarding Information Base, enter the following:

<4500>display fib

Destination/Mask   Nexthop 

Flag TimeStamp     Interface

127.0.0.0/8        127.0.0.1       U    t[0]          InLoopBack0

Table 12   Description of the output information of the 

command 

Flag

The flag options include: 

B – Blackhole route

D – Dynamic route 

G – Gateway route

H – Local host route 

S – Static route 

U – Route in UP status 

R – Unreachable route