3com 4500 26-PORT User Manual

Use the 

 command to view the settings of 

the traffic mirror.

This command is used for displaying the settings of traffic mirror. The information 
displayed includes the ACL of traffic to be mirrored and the observing port. 

Related command: 

.

To display the settings of traffic mirror, enter the following:

<4500> display qos-interface ethernet1/0/1 mirrored-to

Ethernet1/0/1: mirrored-to

 Inbound:

   Matches: Acl 2000 rule 0  running

     Mirrored to: monitor interface

interface-num | unit-id } traffic-limit

All views

:: Specifices an Interface of 

the Switch, for more information, refer to the 

 command in this guide.

: Unit ID of the Switch.

Use the 

 command to view the traffic 

limit settings. If you set the port parameters, the configuration information about 
the specified port will be displayed. The information displayed includes the ACL of 
the traffic to be limited, the limited average rate and the settings of some related 
policing action. 

Related commands: 

Display the traffic limit settings. 

<4500> display qos-interface ethernet1/0/1 traffic-limit

Ethernet1/0/1: traffic-limit

 Inbound:

   Matches: Acl 2000 rule 0  running

     Target rate: 128 Kbps

     Exceed action: remark-dscp 63